(3) Remove the lower control arm rear bushing retainer bolts located on each side of each lower con- trol arm rear bushing.
6 description manual - engine caravan OIL - diesel engines.If bent, broken manual or damaged in any way, do not attempt to straighten or repair the steering knuckle.1 international symbols manual description.5 international symbols description.(7) If engine does not start dodge service within caravan 15 seconds, stop cranking engine and allow starter to cool (15 min- utes before cranking again.International symbols description The graphic symbols illustrated in the following International Control and Display Symbols Chart (Fig.Contact your dealer for service assistance. What is the client Chilton manual?
Light spark knock at low engine service speeds is not harmful to your engine.
7 inspection - steering knuckle.
Mopar provides the best engineered products for servicing DaimlerChrysler Corporation vehicles.
(Refer to 2 - suspension/front/knuckle - removal) (2) Using a screw driver or other dodge suitable tool, pry the seal boot off of service the ball joint (Fig.Fastener identification description The SAE bolt strength grades range from grade 2 to grade.Disassembly disassembly - lower control ARM (rear bushing - standard) mitsubishi (1) Remove the lower control arm from the front suspension cradle.To do so, place an open-end wrench on the flat machined into the links mounting stud, then remove the nut while holding the wrench in activation place.Con- sult the appropriate sections in this manual for the correct application of these lubricants.Warning: DO NOT jump starrozen BAT- tery, personal injury CAN result.Check the upper mount for cracks and distortion and its retaining studs for any sign of damage.Fastener usage service description description - fastener usage warning: USE OF AN incorrect fastener MAY result IN component damage OR PER- sonal injury.6 hoisting standard procedure - hoisting.SAE viscosity An SAE viscosity grade is used to specify the vis- cosity of engine oil.